Three Cases with Manic Symptoms and Cognitive Dysfunction after Wild Plant Ingestion

Distinguishing wild plants in spring from ingestible plants is difficult. Differentiation of budding plants from other plants is particularly difficult. Many people want to find edible plants for health during the spring season. Scopolia japonica can cause symptoms of mania. The author experienced three cases of poisoning by Scopolia japonica. We reported on the cases with literature reviews.

Four Cases of Phytolacca Esculenta Van Houtte Intoxication due to Misidentification as a Ginseng

Poisoning by Phytolacca esculenta commonly occurs by misidentification as other edible plants. The root of Phytolacca esculenta is similar to other roots, such as kudzu, balloon flower, codonopsis lanceolata, and ginseng. The author experienced four cases of Phytolacca esculenta intoxication due to misidentification as a ginseng. We report on these cases with a review of the literature.

A Study of Radiation Exposure in Proton Therapy Facility / 의학물리

Proton therapy facility, which is recently installed at National Cancer Center in Korea, generally produces a large amount of radiation near cyclotron due to the secondary particles and radioisotopes caused by collision between proton and nearby materials during the acceleration. Although the level of radiation by radioisotope decreases in length of time, radiation exposure problem still exists since workers are easily exposed by a low level of radiation for a long time due to their job assignment for maintenance or repair of the proton facility. In this paper, the working environment near cyclotron, where the highest radiation exposure is expected, was studied by measuring the degree of radiation and its duration for an appropriate level of protective action guide. To do this, we measured the radiation change in the graphite based energy degrader, the efficiency of transmitted beam and relative activation degree of the transmission beam line. The results showed that while the level of radiation exposure around cyclotron and beam line during the operation is much higher than the other radiation therapy facilities, the radiation exposure rate per year is under the limit recommended by the law showing 1~3 mSv/year.

Development of QA Phantom Prototype for Imaged Based Radiation Treatment System / 의학물리

In this study, we developed the protopype of QA phantom for image QA including an additional component for image based radiation treatment system. The new phantom considered two main parts: Image quality and fusion accuracy. Image quality part included for daily CT number linearity and spatial resolution, and fusion accuracy part designed to simulate a simple translation-rotation setting. The CT scans of the phantom obtained from conventional CT, MVCT of Tomotherapy unit, and both image sets were satisfied the recommendation of spatial resolution. This phantom was simple and efficient for daily imaging QA, and it is important to provide a new concept of verification of image registration.

Development of Phantom and Comparison Analysis for Performance Characteristics of MOSFET Dosimeter / 의학물리

This study is to develope a phantom for MOSFET (Metal Oxide Semiconductors Field Effect Transistors) dosimetry and compare the dosimetric properties of standard MOSFET and microMOSFET with the phantom. In this study, the developed phantom have two shape: one is the shape of semi-sphere with 10 cm diameters and the other one is the flat slab of 30 cm x 30 cm with 1 cm thickness. The slab phantom was used for calibration and characterization measurements of reproducibility, linearity and dose rate dependency. The semi-sphere phantom was used for angular and directional dependence on the types of MOSFETs. The measurements were conducted under 10 x 10 cm2 fields at 100 cm SSD with 6 MV photon of Clinac (21EX, Varian, USA). For calibration and reproducibility, five standard MOSFETs and microMOSFETs were repeatedly irradiated by 200 cGy five times. The average calibration factor was a range of 1.09+/-0.01~1.12+/-0.02 mV/cGy for standard MOSFETs and 2.81+/-0.03~2.85+/-0.04 mV/cGy for microMOSFETs. The response of reproducibility in the two types of MOSFETs was found to be maximum 2% variation. Dose linearity was evaluated in the range of 5 to 600 cGy and showed good linear response with R2 value of 0.997 and 0.999. The dose rate dependence of standard MOSFET and microMOSFET was within 1% for 200 cGy from 100 to 600 MU/min. For linearity, reproducibility and calibration factor, two types of MOSFETs showed similar results. On the other hand, the standard MOSFET and microMOSFET were found to be remarkable difference in angular and directional dependence. The measured angular dependence of standard MOSFET and microMOSFET was also found to be the variation of 13%, 10% and standard deviation of +/-4.4%, +/-2.1%. The directional dependence was found to be the variation of 5%, 2% and standard deviation of +/-2.1%, +/-1.5%. Therefore, dose verification of radiation therapy used multidirectional X-ray beam treatments allows for better the use of microMOSFET which has a reduced angular and directional dependence than that of standard MOSFET.

Dosimetric Verification of Dynamic Conformal Arc Radiotherapy / 의학물리

The purpose of this study is to develop the optimization method for adjusting the film isocenter shift and to suggest the quantitative acceptable criteria for film dosimetry after optimization in the dynamic conformal arc radiation therapy (DCAR). The DCAR planning was performed in 7 patients with brain metastasis. Both absolute dosimetry with ion chamber and relative film dosimetry were performed throughout the DCAR using BrainLab's micro-multileaf collimator. An optimization method for obtaining the global minimum was used to adjust for the error in the film isocenter shift, which is the largest part of systemic errors. The mean of point dose difference between measured value using ion chamber and calculated value acquired from planning system was 0.51+/-0.43% and maximum was 1.14% with absolute dosimetry. These results were within the AAPM criteria of below 5%. The translation values of film isocenter shift with optimization were within +/-1 mm in all patients. The mean of average dose difference before and after optimization was 1.70+/-0.36% and 1.34+/-0.20%, respectively, and the mean ratios over 5% dose difference was 4.54+/-3.94% and 0.11+/-0.12%, respectively. After optimization, the dose differences decreased dramatically and a ratio over 5% dose difference and average dose difference was less than 2%. This optimization method is effective in adjusting the error of the film isocenter shift, which is the largest part of systemic errors, and the results of this research suggested the quantitative acceptable criteria could be accurate and useful in clinical application of dosimetric verification using film dosimetry as follows; film isocenter shift with optimization should be within +/-1 mm, and a ratio over 5% dose difference and average dose difference were less than 2%.

A study on the knowledge about the field of plastic surgery(I)

No abstract available.